My car was seriously overheating today and following advice from Elite Motorsport (Eddie99) I need to step up my cooling.
I have a stock Polo rad so would like a more efficient alloy version.
I also need to step up my oil cooler. I would like a 19 Row, any fixing size considered.
Thanks.
Give this some consideration bay 221495476062
Built in oil cooler and can cool V8's Land Rover Discovery MKI 2.5tdi Radiator
Well hope you still had a good day?
Rally designs do one if you are not already aware? Probably the cheapest all alloy one as a direct replacement,
Hope you had a good track day I do like rockingham
Sean
quote:
Originally posted by Myke 2463
Give this some consideration bay 221495476062
Built in oil cooler and can cool V8's Land Rover Discovery MKI 2.5tdi Radiator
I have a 19 row Radtec oil cooler available, 330 x 50 x 150 mm, AN -10 fittings, £50.
quote:
Originally posted by rodgling
I have a 19 row Radtec oil cooler available, 330 x 50 x 150 mm, AN -10 fittings, £50.
I have a black mocal 13row cooler, done two race days.
Decided to remove it because it's not required and oil is running too cold.
It cost me £90 from demon tweeks.
I'd take £45 including postage.
rodgling's turns out to be only a 12 row and I really need as big as possible as my oil is running hot hot!!
quote:
Originally posted by Benzo
I have a black mocal 13row cooler, done two race days.
Decided to remove it because it's not required and oil is running too cold.
It cost me £90 from demon tweeks.
I'd take £45 including postage.
Out of interest, what size is your current cooler, and where is it mounted? It might just be a case of getting more airflow to your existing cooler?
Mocal Cooler is 260x100mm