Board logo

Wanted - chain drive diff with carriers mx5 shafts
calvins_media - 2/1/15 at 06:14 PM

hi i am new to the forum and i am converting a fiat uno mk1 1985 to rwd bike engine using a zx10r engine so i am looking for a chain driven diff with carrier and bearings ect, thanks

im using a mazda mx5 rear subframe

07955931113

[Edited on 3/1/15 by calvins_media]

bart - 2/1/15 at 08:45 PM

hi try this guy he made mine.
or mk cars
there's quite a few around

http://www.westgarage.co.uk/index.html

motorcycle_mayhem - 3/1/15 at 12:02 PM

I've just put two pictures of a chain drive unit in my 'stuff4sale' photo archive for you to look at.

It's all new, unused (attached only), very solid and well made, complete with Brise starter motor. Simply weld something to hinge (or bolt) the whole assembly on to.
Uses a Fiesta differential unit (I'll supply with or without), which you can either use the Fiesta outputs for, or go for the Quaife lobro outputs.

PM me if you desire. Note, however, that the assembly will be considerably more than £50.