Board logo

Fisher Fury Chassis Wanted
welderman - 8/1/15 at 09:45 PM

As title. Could do with one. Or lots of measurements

joneh - 8/1/15 at 10:32 PM

I have the old chassis which I'm rebuilding - can do some measurements if required. Although I don't know how it compares to the current model.

Jon

welderman - 9/1/15 at 07:50 AM

Cheers fella, will get back to you if I cant get hold of one

adithorp - 9/1/15 at 09:09 AM

You're welcome to come and measure mine.

Why?

joneh - 10/1/15 at 11:15 AM

If you're producing a roll bar / cage for the fury - I'd be interested in one!

welderman - 10/1/15 at 08:20 PM

Made 3 roll bars for fury. Bun never a cage

HowardB - 10/1/15 at 08:32 PM

I want a cage too, one that goes inside the roof line, inside the windscreen, and offers side impact protection too,.. perhaps if enough of us get together we can get some made,.....

just a thought

joneh - 10/1/15 at 08:37 PM

quote:
Originally posted by HowardB
I want a cage too, one that goes inside the roof line, inside the windscreen, and offers side impact protection too,.. perhaps if enough of us get together we can get some made,.....

just a thought


I'd be interested!

ianminki - 19/1/15 at 08:00 AM

hi mate
I have a fury chasse I will not be using once I have taken off all the parts from it that I need for my car u2u me if you still need one
regards ian

welderman - 19/1/15 at 10:11 AM

u2u 2U

FuryRebuild - 19/1/15 at 10:50 AM

I'm making a full composite tub for mine which fits inside the steel perimeter of the chassis. Imagine cutting out the transmission tunnel floor, and making all that structural carbon. I have made a composite passenger footwell as well, making it easier for the passenger to put their feet forward.

I may be persuadable to run off another tub if mine comes out fine.

Mark

welderman - 19/1/15 at 10:59 AM

quote:
Originally posted by FuryRebuild
I'm making a full composite tub for mine which fits inside the steel perimeter of the chassis. Imagine cutting out the transmission tunnel floor, and making all that structural carbon. I have made a composite passenger footwell as well, making it easier for the passenger to put their feet forward.

I may be persuadable to run off another tub if mine comes out fine.

Mark




hmm sounds interesting, theres not much room in there.

FuryRebuild - 19/1/15 at 11:05 AM

you don't lose a lot from the interior - basically 4mm on the sides, and 14mm from the back.

You gain hugely in rigidity and strength though, and will dump a lot of weight. I haven't calculated the forcasted drop yet, but I'm anticipating a 10kg drop.

M