Board logo

Wurth Plug Tool M10 x 1.00
T66 - 4/8/15 at 07:43 PM

Any takers ? Only have one to do, and £100 is a bit fruity



cheers

Neilwilson - 4/8/15 at 07:56 PM

Are helicoils any good?

davidimurray - 4/8/15 at 08:06 PM

http://www.ebay.com/itm/M10-x-1-0-V-Coil-Fits-Helicoil-SPARK-PLUG-Wire-Thread-Insert-Repair-Kit-/121217871427

T66 - 4/8/15 at 08:06 PM

I would prefer the wurth insert, they seem a bit more substantial. However I have an open mind as long as the end result isnt going to fail

gremlin1234 - 4/8/15 at 08:14 PM

quote:
...Only have one to do...
why not do all 4 /6 /8 ?

T66 - 4/8/15 at 08:17 PM

Makes sense , anyone used helicoils on spark plug threads ?

Neilwilson - 4/8/15 at 08:36 PM

I haven't had much to do with helicoils for plugs but I have used them for cylinder blocks - head bolts. Rumour had it that they would give a stronger hold than the block itself.