hi looking for a car engine & gearbox to replace a R1 setup i have in a fisher fury i have recently brought , not looking for mega power
something reliable . Reason for change need reverse to get in and out of garage

I have a Toyota 2zz engine package I would like to sell. It's been sitting a few years but has most parts there. You would need a Ford T9 or Caterham 6 speed box to go with it and be handy with making up mounts and either shortening the sump or finishing the dry sump, it has a dry pan with it.
You'll get 190-200hp out of it.
If you are interested then drop me a line.

If you can find a 1.6 zetec se (sigma) I have a bellhousing and type 9 for it if that is any help (I do have a puma 1.7 engine that will go with it but I suspect it has a bent valve). 1.6 will make 140 hp on bike carbs and nodiz ecu or there is a thread on here about how to get it running on OEM bits. Light and revvy, what's not to like, used in caterham and Westfield so mounts probably available.

[Edited on 6/11/16 by Ugg10]

[Edited on 6/11/16 by Ugg10]

Pinto with downdraft, type 9, stainless exhaust ?
I'm tempted by your R1 set up

Ive got a 2.0 blacktop here with the gearbox still attached as it was ripped out of the car. Engine loom but not the ecu bit..

£150, come get it!

I have a Focus ST170 complete car, all running, MoT failure.

now sorted with a engine package. Thanks to all that replied, still have R1 full installation for sale if anyone is interested