Just a thought, any rim sections out there inner/outer.

Cheers,
Dean

What sizes?

Anything really. What have you got? I need some outer rims for one set of wheels and inner rims for another set I have.


Cheers,
Dean

Defo got some spares, will check dims Friday evening or Saturday

I have:-

7" inner x 2
6" outer x 3
3.5" outer x 2 both bent edges, will straighten but not pretty
1.125" outer x 2
1.5" outer x 2
4.5" inner x 1

Mix of revolution, Compomotive and force sections

Any use?

2 x 6"outers gone, dinged 3.5" outers and the the 1 x 4.5 inner, rest still available

Hi, if the 7" inners are the same sizes as image, I would like them. Could you measure the PCD please and no. of bolts.

Thanks, Dean

Yep will do tonight. Defo 18 hole but can't remember bolt hole PCD or centre bore, will let you know later
Cheers craig

I'd say about 268mm hole centre to hole centre
And centre bore of 256? Mm

Hi mate, had a measure up and I think they're going to be too tight towards the rear dampers mate unfortunately, the PCD does seem identical though FYI.