Board logo

MK rear roll hoop/bar
40inches - 1/10/19 at 08:14 PM

Anyone got one going spare?

nick205 - 2/10/19 at 08:01 AM

May be stating the obvious, but have you asked MK themselves?

Sure it's got to be shifted from them to you, but you'll know you're getting the real thing and it may not cost as much as you'd think (I don't know the cost BTW).

CosKev3 - 2/10/19 at 08:08 AM

quote:
Originally posted by 40inches
Anyone got one going spare?


I've got a Mac1 one,bolts down with 3 bolts on square plate each side,and rear stays which fix to the chassis using what looks like a wishbone type bracket

40inches - 2/10/19 at 08:54 AM

quote:
Originally posted by nick205
May be stating the obvious, but have you asked MK themselves?

Sure it's got to be shifted from them to you, but you'll know you're getting the real thing and it may not cost as much as you'd think (I don't know the cost BTW).


£200 + carriage, hence trying to find a second hand one.

nick205 - 2/10/19 at 09:12 AM

quote:
Originally posted by 40inches
quote:
Originally posted by nick205
May be stating the obvious, but have you asked MK themselves?

Sure it's got to be shifted from them to you, but you'll know you're getting the real thing and it may not cost as much as you'd think (I don't know the cost BTW).


£200 + carriage, hence trying to find a second hand one.



OK - handy to know a cost.

40inches - 2/10/19 at 09:12 AM

quote:
Originally posted by CosKev3
quote:
Originally posted by 40inches
Anyone got one going spare?


I've got a Mac1 one,bolts down with 3 bolts on square plate each side,and rear stays which fix to the chassis using what looks like a wishbone type bracket


Thanks Kev, do you have the measurement of the height of the bar from the body?
And how much

Barkalarr - 2/10/19 at 07:05 PM

Don’t MK to do free carriage?

CosKev3 - 2/10/19 at 08:24 PM

quote:
Originally posted by 40inches
quote:
Originally posted by CosKev3
quote:
Originally posted by 40inches
Anyone got one going spare?


I've got a Mac1 one,bolts down with 3 bolts on square plate each side,and rear stays which fix to the chassis using what looks like a wishbone type bracket


Thanks Kev, do you have the measurement of the height of the bar from the body?
And how much


I'll measure it tomoz.

I advertised it on here at £50

CosKev3 - 4/10/19 at 08:43 AM

quote:
Originally posted by 40inches
quote:
Originally posted by CosKev3
quote:
Originally posted by 40inches
Anyone got one going spare?


I've got a Mac1 one,bolts down with 3 bolts on square plate each side,and rear stays which fix to the chassis using what looks like a wishbone type bracket


Thanks Kev, do you have the measurement of the height of the bar from the body?
And how much


41cm from mounting plates to top of bar

40inches - 4/10/19 at 09:30 AM

quote:
Originally posted by CosKev3
quote:
Originally posted by 40inches
quote:
Originally posted by CosKev3
quote:
Originally posted by 40inches
Anyone got one going spare?


I've got a Mac1 one,bolts down with 3 bolts on square plate each side,and rear stays which fix to the chassis using what looks like a wishbone type bracket


Thanks Kev, do you have the measurement of the height of the bar from the body?
And how much


41cm from mounting plates to top of bar

That looks good You have a U2U.

40inches - 9/10/19 at 02:34 PM

Now sorted. Many thanks Kev