Hi, I am after primarily a good crankshaft and conrods for a 1600 crossflow. Also, if anyone happened to have +090 pistons I would be interested.

If you have any other crossflow parts you are looking to sell, I may be interested in buying them too.

Cheers
Mark

found one on ebay no connection to me

I have a inlet manifold for twin carbs if you're interested ? its in very good nick with a water outlet underneath.

Also a std bosch vac dizzy, std oil pump (seemed ok but went for a HP oil pump when i rebuilt the engine) and a camshaft (think its a gt/SPORT spec as the head is GT and engine was manufactured 1979) the lobes look good, again just went for a brand new piper cam when I rebuilt my engine.

UTU if you're interested - I am in chorley, lancs.

Peter.

Hi Mark,
I have 6 or 7 crossflow cranks and boxes of con rods as well as a variety of pistons which may be of use to you, also have a pile of standard camshafts, oil pump, clutches and fly wheels. Thers's a couple of exhaust manifolds etc too.
I did have some =090" heppolites but did a deal withthe chap at yorkshire rally supplies for some rally mudflap material , I think they may still be on his site for abot £50. We are near Carlisle

I'm in Edinburgh... I have a 1600 block with everything incl oil pump and dizzy less head/pushrods. I also have a head available but no rocker gear or pushrods.

If your interested give me an email...

jc@bass2dark.freeserve.co.uk

Cheers

u2u's an email sent

Thanks for the replies everyone

cheers
Mark (formerly 9904169)