I'm on the hunt for a Spacer to sit between my fuel pump and block in my crossflow. The previous pump had just been overtitghtened to compensate for this (bending the flanges in the process!) but having bought a new one Id love to try and fit it properly. can anybody point me to where I could get one.

Converted mine to electric and fitted a blanking plate , may possibly still have spacer , will try to check over the weekend, willlet you know if I still have it. Rusty

Thankyou

you could make one from ally flat bar or plastic strip if needbe. its the shape of the pump housing with the 2 mounting holes and a rectangular cut out as per the hole in the block, It needs to be around 1/4, 6mm thick if i remeber correctly.

That sounds like an option, Funny how a part can be like hens teeth.. Id been told the part is originally asbestos I guess 'cos of where it sits and what it connects.

What about a wad of beer mats cut to shape?

They'd have to be automotive quality Beer mat's I suppose..

Rek , you have U2U

Rek you have u2u