Board logo

50mm OD steel tube offcut
12a RX-7 - 22/6/05 at 06:18 PM

prefer 2mm wall or greater (3mm ideal). Only around 300mm required.

cheers - Mike

[Edited on 22/6/05 by 12a RX-7]

Volvorsport - 22/6/05 at 10:56 PM

i got some !!

12a RX-7 - 23/6/05 at 06:33 PM

Hi again,

Where abouts are you in Lincoln ? drop me a U2U if you like.