Board logo

Dellorto Twin DHLA40 Throttle Linkage
Stuart Walker - 21/7/05 at 02:00 PM

As per the title, need a twin 40 linkage for my DHLA's, trying to avoid paying £50 for a new one...

Cheers,
Stu

stevebubs - 21/7/05 at 05:02 PM

quote:
Originally posted by Stuart Walker
As per the title, need a twin 40 linkage for my DHLA's, trying to avoid paying £50 for a new one...

Cheers,
Stu


I'll have a nosy around in the garage a little later - may actually have one of these lying around.

Stephen

stevebubs - 21/7/05 at 05:08 PM

Are you only after this part?


Description
Description

If so, do you want to swap it for the DGV?

Stuart Walker - 21/7/05 at 06:14 PM

Is that definately for two, or just a single one?

If its definately for two then the swap sounds fine.

Cheers,
Stu

stevebubs - 21/7/05 at 06:30 PM

It's what I took off my twin 40s when I replaced it with a lowline one.

It's missing
the rod(s) that goes down to the actual bodies
The upright plate that the throttle cable comes through.

Both these should be easily fabricated

stevebubs - 21/7/05 at 06:34 PM

BTW If you can wait until around 18/19 Aug then I should be in Doncaster for a few days - can meet up halfway between Donny and Stokesley and swap then if you want