Hi all, after just getting a quote of over 60 quid for one sheet ally delivered I thought I'd ask if anyone here's got some left overs?

Anything considered, but preferably offcuts of these sizes (approx, left my measurements at home!):

1.25m x 1.0m
1.5m x 0.5m
1.0m x 1.0m

If you've got anything close to those sizes please give me a shout, as I said I've left proper measurements at home, above are only estimates!

Doesnt have to be tidy, scratched as you like, not going to be seen! 1.0mm think prefered but obviously I can't afford to be too picky!

Have you tried metal supermarket

They do smaller quantitys. If the sheet is scratched use water paper to polish it up

metal supermarkets
the convenience store of the metal industry
For more store information, click on the store links below.
Coventry
0247-636-6567
msccoventry@aol.com Unit B Colliery Lane
Coventry, Exhall CV7 9EJ
Gateshead
0191-487-2144
gateshead@metalsupermarkets.org.uk 381-A Jedburgh Court
Gateshead, NE110BQ
Govan
0141-440-1300
msgovan@aol.com Units #8 & 9 Moorpark Ind Estate
Govan, Glasgow G51 2HF
Leeds
0113-238-0900
leeds@metalsupermarkets.org.uk 1 Overland Trading Estate
Leeds, LS277JN
Livingston
0150-649-7111
mslivingston@aol.com 7 Kelvin Square
Livingston, EH545PF
London
0208-961-1414
parkroyal@metalsupermarkets.org.uk 11 Hanover West Industrial Estate
London, NW107NB
Manchester
0161-872-1199
mscmanchester@aol.com 1 Westbrook Trading Estate
Manchester, M171AY
Redditch
0152-768818
mscredditch@aol.com 10 Madeley Road
Redditch, B989NB
Southampton
0238-022-0999
southampton@metalsupermarkets.org.uk Unit #16 Mount Pleasant Ind. Estates
Southampton, SO140SP
West Midlands
0121-553-4424
janet@metalsupermarkets.co.uk 37 Kelvin Way Trading Estate
West Midlands, B707TP

i found metal supermarket a bit pricey,mail " james" he knows a place near guilford that sell offcuts

Don't lolocost sell ally sheet? Not sure of prices.

frost sell small sections as well

www.frost.co.uk

Try a local sheet metal work company.I bought 3 1m x2m sheets of 1.2mm for £14 each from a local company, much cheaper than the metal supply companys they obviously buy in bulk and were interested in what i was building.
Paul.