hi,
thinking about how to do the interior of car, i like the look of the carbon fibre sheet does anyone know where i can get hold of some sheet for the
panels?
Thanks Tom
Depends what sizes you need
Fluke-Motorsport sell carbon fiber sheets in varying thicknesses and plys.
Interior panels only need to be between 1 and 2 mm of thickness, bonded and riveted on.
Retails at something upwards of £100 per 1000mm by 500mm i think.
Oli
or do a search on carbon effect ABS sheet if you don't have to use real Carbon fibre weave.
http://www.esp-plastics.co.uk/acatalog/molding_plastic_sheeting.html
Hi,
I used this guy called Matt. It was £75 for a 1000x500 sheet and superb quality.
Mmnjs@aol.com
Bit O/T I know but just out of interest how easy is this stuff to cut? Is it a masking tape and hacksaw jobbie, can you use a jigsaw with a fine blade or does it splinter?
A decent pair of tinsnips cuts the 1mm sheet very nicely.
Hi
For cutting carbon fibre the best things to use are grit edged hacksaw blades available from screwfix direct.
This is what I was supplied with on a carbon fibre course.
Chris.
quote:
Originally posted by tiffshaw
For cutting carbon fibre the best things to use are grit edged hacksaw blades available from screwfix direct.