Which means its a pain to change the U/j's later should you need to. BM made an excellent job of both my props. (Son's Plastic Pig / Jago needed a new prop)
Also they are only at St Neots, / Eaton Socon. ie Local.
Good job and worth the noney.
Hello
We are looking for a ford prop shaft to fit a 5 speed type 9 with a 1" rather that 3/4" spline.
It needs to be the type that go's straight from the spline to the UJ not the type with a big rubber coupling.
You should ring Bailey Morris, they make excellent prop-shaft's made to measure.
140 quid delivered, and worth every penny - completely balanced and weighted.
Would you risk something 'cheap' spinning at that speed next to ya A$$? I know I wouldn't :p
Click Here
Cheers,
Murray
Tranny don't have the rubber donut in them.
mmmm
Might look into that
very early sierras had no 'Donut'
Hi Rusty
What diff and how long?
Wyn
If you get BM to do it, they change the UJ's to circlipped ones as the Ford ones are staked in.
Which means its a pain to change the U/j's later should you need to. BM made an excellent job of both my props. (Son's Plastic Pig / Jago
needed a new prop)
Also they are only at St Neots, / Eaton Socon. ie Local.
Good job and worth the noney.
Not sure of the length but the flange on the diff is vauxhall viva. I can messure the length later.
The thing is I have the old shaft but it is to laong and has the wrong spline as we changed the gearbox from 4 speed to a 5 speed.