as above if anyone has one around yorkshire area, pref SD1 varient

Cheers
Darren

If you are using a LT77 box, then you must get a flywheel for a P6 or SD1, ie a 9.5" clutch, and not the 10.5" for the Rangerovers etc. cos the 10.5 clutch wont fit in the bell housing... or so I am told.
also they are lighter than the 10" flywheel

Of course you can use a Landy / rangey flywheel, if you get it re-drilled for a 9.5! clutch.

quote:

---

Originally posted by wilkingj
If you are using a LT77 box, then you must get a flywheel for a P6 or SD1, ie a 9.5" clutch, and not the 10.5" for the Rangerovers etc. cos the 10.5 clutch wont fit in the bell housing...

---

Any use?

ebay item 4601689018