I'm in need of a couple of connectors for my Zetec upgrade:

1. Crank position sensor (I think this is the same type of connector as the injectors?)

2. Coil pack connector - the small one that plugs into the side of the coil pack, I think its a 3 way?

Anyone got an old loom or doner they could raid for me?

Cheers
Chris

i got an old audi 80 i am gonna bin, i will have a look later and see if its got some that may fit

I'm after a crank pos sensor plug as well.
Also TPS plug and FIdle solenoid plug.
If you get offered more than one, gissa shout.

I have spare injector plugs which fit crank sensor and idle solenoid and a spare TPS plug, all with 6" of wire on. u2u me if helpfull.
(with address)

[Edited on 3/2/06 by Dusty]

Dusty, U2U sent.

Thanks,
Chris

Your lucky day then chaps

Every c**nts wanted a piece of my ass this weeks so I had a day of and went for a wonder around the locall scrapie today.

I have got (I think)
2 x injector harness with cold start con/ tps con/coil con/ water temp con/ vr con.

1 x edis4 with con/ coil with con/ vr sensor with con.

1 x edis4.

regards warren

quote:

---

Originally posted by big_wasa
Your lucky day then chaps

Every c**nts wanted a piece of my ass this weeks so I had a day of and went for a wonder around the locall scrapie today.

I have got (I think)
2 x injector harness with cold start con/ tps con/coil con/ water temp con/ vr con.

1 x edis4 with con/ coil with con/ vr sensor with con.

1 x edis4.

regards warren

---

Yep ive got 1 spare u2 me your name and address and ill stick it in a jiffy bag on Monday.

regards warren

U2U Sent