And is around tomorrow (Sunday)

Needs to be higher power than my Clarke 151 Turbo and able to weld 4/5mm plate steel.

One of my engine mounts is cracking and I would like to repair it - a 5 minute job with the right tool...

Am in Lower Earley, Readinga and can bring the part to you...

[Edited on 1/4/06 by stevebubs]

I only have the little Seally 100 (80A Max), and have no problems welding 6mm plate. Your 151 should do the job with ease. He who dares wins, (as per Dell Boy).and the SAS.

Steve,

I've got a clarke 160t, more than happy to give it a go for you - plan to be in most of the day - in guildford.

Ned.



new toy

[Edited on 2/4/06 by ned]

I am in Pangbourne. Am here all day today if you want to come over. Have just finished a set of engine mounts for a Toyota,so I know welder copes.
Patrick.
U2U me

Thanks folks but the weather was a bit of a non-starter today

Will pop it off in the week and run it down to one of the local shops

Stephen