As it says in the title - I need to connect a braided clutch pipe to the push-on connector on my V6.

Is it like the fitting on this picture?

I cut the pipe to take the union nut off and made up a new pipe using 'proper' fittings.
HTH

Er.. Owelly - you work @ a power station?

3 mega watts!!! (3000 electric fires for avg. peeps, or 1000 kettles...)

Is that a wind turbine station?

(on pc in pic)

I am unable to answer that question

Cool - can you negotiate a group-buy on electricity!

Bloody angle grinder and all those cups of coffee have cost fortunes

Looks like a scene from StarWars

Ironically, son of Star Wars to be pedantic........
I can send you 'leccy in a jiffy bag if you want but it will be at 60hz. Any good to you?

LOL

Yeah sounds good - I'll have 2 bags

RazMan - sorry for thread hijack

Oooops. Sorry Razman.

No problem - I was waiting to see if a deal was in the making

Owelly - That's the fitting. I need the other half that connects to the one in your pic. I can't cut my pipe as it is flush with the bellhousing.

[Edited on 8-4-06 by RazMan]