Board logo

rover V8 Injection Stepper Motor Air Bypass Valve
darrens - 17/7/06 at 10:14 PM

As above, more commonly known as the Air Bypass Valve.

Cheers


mark chandler - 18/7/06 at 06:53 AM

hot wire or flappy box, I have a flappy one you are welcome to.

Regards Mark


Agriv8 - 18/7/06 at 06:53 AM

Darren,

Hotwire of flapper ?

Regards

Agriv8


darrens - 18/7/06 at 06:16 PM

Hotwire type I believe, it is the attached if that helps (although photo is crap)

Cheers Rescued attachment 12-07-06_2220#1.JPG
Rescued attachment 12-07-06_2220#1.JPG


mark chandler - 18/7/06 at 09:21 PM

hot wire, have you tried thinners to clean it and WD40 to lubricate ?

Rgds Mark


Agriv8 - 19/7/06 at 06:59 AM

darren does it move at all make any buzzing noises.

mine is the same hotwire system and at switch off it always gives a buzz and a click - I belive this is normal.
Mine seems to work as even with a very lumpy cam tickover is maintained


darrens - 21/7/06 at 11:14 PM

does bugger all, always in the fully re-tracted position i.e letting air in all the time.

Tried the old wd40 thing o no avail, then accidentally shut th boot on it and cracked it. Now it definitely doesn't do anything.

Cheers