Evening one and all,
I'm in dire need of a bangoi bolt for a blackbird clutch slave cylinder. Only problem is, I've no idea what thread it is? Does anyone know the thread or have a suitable bolt lying about? Or know of somewhere near daventry that'll have one? I REALLY need one, as it the only thing stopping me getting back on the road.

I have a fair selection of banjo bolts (I have 3 ZZR engines and only 1 car!)

If you find out the size let me know and I'll have a look.

Mike

Hate to state the obvious but your local motorbike/accessory shop, or god forbid a dealer

There any local off roading shops, Jordans Bikes, even Halfords have started doing a bike range.

They may even be similar to the ones used on car brake pipes or car clutches

Or a Hydraulics supplier from the yellow pages?

Have you not got a sample, or could you remove the cylender and take it with you as a sample.

I've got the mangled old bolt, but have already ordered a replacement but it had the wrong thread due to the wollies in the shop. I can try all the usual suspects tomorrow, but most of the helpful places shut on a saturday.