Board logo

Manifold for 1.6l Zetec
fuz - 19/9/06 at 12:09 PM

Hi. We require an inlet manifold for a 1.6l zetec. The zetec is a silvertop phase 1 engine. We have bought some GSXR 600 bike carbs for it, so it needs to be a manifold to fit these bike carbs.

Ta

Andy

Project7 - 19/9/06 at 05:14 PM

Hi Fuz,

It sounds like you are attempting exactly the same as me - I purchased a DCOE manifold from Raceline (They supply manifolds specifically for the 1.6) and then i had a adaptor plate made up so the GSXR 600 bodies fitted using 'O' rings. I could probably send you the CAD file of the adaptor plate if it is of use.

Project7 - 19/9/06 at 05:17 PM

Like this


[img][/img]