Board logo

lights and scoop
dilley - 8/10/06 at 05:41 PM

Im still looking for some small rond headlights, maybe some bike ones but I cant find anything anywhere, also looking for a bonnet scoop approx 12" square, again cant find anything, any help appreciated,

Thanks Andrew.


Hammerhead - 8/10/06 at 06:19 PM

have you tried ebay? or demon tweeks?


dilley - 8/10/06 at 06:21 PM

yup


rusty nuts - 8/10/06 at 06:35 PM

Made a scoop for my bonnet to cover the air filter for SVA , seems to have fallen off since . I'm only in Shelford near Cambridge if it's any good to you but it's a bit bigger than 12" long from memory its about 30" long x12" wide and 4" high . Made to fit the O/S of the center of the bonnet


dilley - 8/10/06 at 06:38 PM

30" is far too big but thanks for the offer.


Hellfire - 8/10/06 at 06:42 PM

Bike lights are rarely SVA compliant as they dont dip correctly. Ones from SVC (5.75" IIRC) are superbly bright and excellent quality. With headlights you get what you pay for...

Steve


dilley - 8/10/06 at 06:44 PM

Im on the road, its just an upgrade.


russbost - 8/10/06 at 07:02 PM

I have a pair of spots as main beam & a pair of fogs as dip. I believe they comply with construction & use - plod have never given me any grief, you need a helpful Mot station who agree they are imported left dipping units which you have masked (obviously add the masking!) to give a flat dip pattern - & yes, it's in the Mot regs!
Alternatively I think SVC do some 3" round units which are dip & main beam, think they are about £80 a pair.