Board logo

R1 headlight relay
locoboy - 14/11/06 at 10:21 AM

Looking for an R1 healdight relay assembly for a 4XV 1998 engine.

Cheers

Kissy - 14/11/06 at 12:19 PM

Any 12V 30A+ realay should do that job.

chockymonster - 14/11/06 at 02:25 PM

quote:
Originally posted by locoboy
Looking for an R1 healdight relay assembly for a 4XV 1998 engine.

Cheers


I have the headlight side of the loom from a 5pw if that helps? all of the clock bits have been chopped out.

If it's to connect to your 4xv loom then just chop the plug off and solder the wires to the main loom.

locoboy - 14/11/06 at 06:45 PM

quote:
Originally posted by Kissy
Any 12V 30A+ realay should do that job.


reason i wanted the R1 in partucular was that i have the r1 loom and it would have been simpler for an electrical numpty to just plug and play rather then grafting in something non R1!

Deckman001 - 14/11/06 at 09:13 PM

Contact Desyboy about this he has the moddied loom drawing that was done for his R1 instal into an Indy using the Sierra collumn and stalks, the indicators were easy, the headlights were a right pain and took quite a while I believe, but this is only if you want to use the original switching on the Sierra collumn
Hope this helps
Jason
ps, the bike relay wasn't used on Des's car, he had to use a 30A jobbie