As per the subject really. I have made some new cycle wing brackets to replace the crap 10mm tube+3mm flat bar ones that kept breaking - the new ones are 1 1/8" (about 28mm) x 1/4" (6mm) flat bar.

The wings were previously "Wurth"ed to the brackets but I was able to pull them off the old brackets quite easily, so I want to use bolts for the new ones. Anyone got 4 stainless dome head allen bolts M8 x about 20mm available in return for a couple of beer tokens? I've got nylocs and washers, but the likes of Tifosi seem to only sell in 10s.

Cheers

Try eSkip - here.

Don't bolt them on.....I used flat bar like you and then fibreglassed the wings on to it....they are absolutely solid not going anywhere! There's no bolts coming through so no crazing etc etc.....Oli.

Simon, U2U sent.

Dan.

I've deffinatly got some zinced M8 domes,i'll have a check in the garage tomorow re the stainless if dan cant help.

eBay Link

Thanks for the various replies and U2Us

I've got some about 40mm long and you can them have free if you U2U your address. A2 grade I think.

Unless you're already sorted.

Cheers.