Board logo

sika pu adhesive
02GF74 - 14/1/07 at 01:26 PM

Anyone know who sells this? (PU adhesive by sika).

I need antoehr tube and can't remember where I got my old tube from? think is is homebase but ??????


cct7kitcars - 14/1/07 at 01:28 PM

i use bond and seal from wurth found its the best stuf going you can have a tube for 8 quid


Russ-Turner - 14/1/07 at 01:42 PM

Tiger seal any good?

see here.
http://www.locostbuilders.co.uk/viewthread.php?tid=58310&contribmessage=none


phoenix70 - 14/1/07 at 02:13 PM

Just pop into your local PartCo, they should have it (at a resonable price too)


ned - 14/1/07 at 02:21 PM

decorating direct are cheap.


graememk - 14/1/07 at 03:04 PM

got some from part co there own make seems to work ok


RazMan - 14/1/07 at 07:34 PM

Your local motor factor will definitely have a version of Sikaflex. They are all pretty much the same thing (with a few exceptions for the really specialist applications)


02GF74 - 16/1/07 at 11:22 AM

On satrurday bought some green gripfil stuff that man in shop (decoratoing) recommened; even though I showed the tube of sika that he'd never heard of, he reconned his stuff was better. Was it F***

Leeft it over night and it had not dried out so scrpaed it off, sanded it off etc: what took some time.

I bought some evostik metal welding type stuff and put a small bit to stick on some metal - learnt my lesson -so if it fails, I won't have to spend so much time.

B&Q nor Homebase sell it - really am puzzled wher I got it from!!!!!


MikeRJ - 16/1/07 at 12:53 PM

MachineMart sell PU adhesive.

Here's a hint, if the packaging states "Solvent free" then it's usualy crap!

[Edited on 16/1/07 by MikeRJ]