Board logo

stainless steel mig wire (only a bit if pos)
FlansS14 - 16/4/07 at 11:43 AM

Hi,

Im after some ss mig wire so i can Tack up my exhaust then send it off to be Tig welded. im sure its 0.8mm wire

anyone got any offcuts


stevebubs - 16/4/07 at 11:59 AM

where are you?


welderman - 16/4/07 at 12:02 PM

quote:
Originally posted by stevebubs
where are you?


philosmond - 16/4/07 at 12:13 PM

If your only tacking it use m/s wire works well anyway the m/s weld will take on some of the propertys of the s/s also when they tig it they should grid back your welds hope this helps


FlansS14 - 16/4/07 at 02:48 PM

Im baised near milton Kyenes