Anybody got a spare sierra indicator stalk in working order in the garage.

Not a good reason for a Locost to be off the road, so happy to pay for one plus postage.

Cheers

Ian

with/without horn push?

Ian,

whats it not doing, suspect its that the contacts have become contaminated 20 mins to seperate them clean and assemble job done - or is it more serious ?

Regards

Agriv8

Without horn push. I thought they were all without but that probably shows my ignorance!

ok got 1 in stock,part no starts 87bg and hazard switch is round,there are 2 types,,1 is switched to earth,the other to live,dont know what way this one goes

As my previous post, don't go by the shape of the hazard as there are mk1 switches with round hazards.

Look for pin 15 on the back and you'll have a mk1 switch

If it's 31 instead its for a mk2 wiring layout

Thanks for all the assistance some answers to the questions.

It is faulty as the plastic pieces have worn to the extent that they do not hold the contact properly so repair is out.

It is a round hazard switch with pin 15 so that makes it a mark 1 I think. Definately switched live having spent time trying to find the fault.

So the question is anyone got one.

Ian

[Edited on 14/5/07 by Sporty]

I got mine from lolocost at Stoneleigh, he had a load of them (mk1) in one of his plastic parts containers. So there's one avenue.

Theres a guy on the xr owners club that had one he was going to post to me before I managed to get one. So if the worst comes to the worst and no one on here does then I'll pm you his details.

Barry at the XR4i spares centre has one instock he informed me of as well just incase (01375 672641)


Cheers

G