Does anyone have about 150mm of 5mm dia round stainless steel bar then can sell me for beer tokens?

Every on-line supplier I've looked at has either got imperial sizes only, or wants to sell me a large bundle of 12" lengths, or has a hugely out-of-proportion P&P charge.

It has to be 5mm to match something else, and it needs to be presentable (or can be emery-papered to look nice). Any grade would do, as long as it's reasonably machinable (I've got to drill a hole in one end).

Ta muchly,
David

16mm x 570
ebay
OR
just email this guy - he's bound to have what you need...
eba y2

hth
Steve

a very .ong stainlees steel bolt - probalby strugggle to get 150 mm without any threaded part.

I had a look through the bay of E - I could only find bundles, and the postage was far too high.

I actually need around 100mm, but I may need the extra to allow for cock-ups, etc.!

I've got quite a few offcuts of 5mm dia stainless bar which will do the trick. (gratis)

Let me know what you want

U2 me your address and I'll get it off to you ASAP

Cheers

Dave

Thanks very much Dave!

You have a U2U...

Must be a few boatyards out your way David? They'll have some, or their fabrication shop will.

No worries Syd - looks like I'm sorted, thanks to Dave J (now there's a coincidence!)

dont have 5mm but we have
6
8
10
12
16
20
25
32
40
60
100
sorry