Board logo

Wanted - Sierra shafts, hubs & bearing carriers
Richard Quinn - 27/6/07 at 09:05 PM

As above. Desperate now! bolt on or push in (bolt on preferred). Let me know if you have any kicking about please. Cash waiting!

meany - 27/6/07 at 09:12 PM

someone selling a full setup from an XR4i..see in for sale section

Catpuss - 27/6/07 at 09:43 PM

Where abouts are you?

I've probably got a spare rear set up (prop, driveshafts, hubs and 3.92 diff).

Richard Quinn - 28/6/07 at 06:54 AM

I'm in Merseyside but get down to the Midlands and South Wales quite regularly

EVs - 28/6/07 at 11:19 AM

quote:
Originally posted by Richard Quinn
As above. Desperate now! bolt on or push in (bolt on preferred). Let me know if you have any kicking about please. Cash waiting!


I'll be putting some (push in) on ebay in the next day or so if that's of interest.

Richard Quinn - 28/6/07 at 12:35 PM

I'm always keeping my eye on ebay anyway.

welshboy - 28/6/07 at 03:02 PM

hi iv got a complete rear end off sierra it was a 1994 2.3 v6 the shafts are push in and the brakes are drums if its any help to you going cheap £30 the lot ? (no diff ) u2u if intreasted

carlgeldard - 28/6/07 at 06:19 PM

Hi Richard

I've got an open diff, 2 stub axles 2 bearing carriers 2 complete calipers and 2 disks with 4 pads and 2 hubs. All you need is 2 wheel bearings and 2 driveshafts. I will sell all the item I have for £120. The only reason I'm selling the calipers etc is the clearance issuse with the 13" wheels that I am now trying to use.

Carl

Catpuss - 1/7/07 at 09:51 AM

There is a diesel sierra being broken up as Abbey Lane Breakers (the name is Abbey.. something) just off Abbey lane. They said they wanted 20 quid per drive shaft, didn't ask the diff price.

Basically on Monday they are taking the old perkins engine out for a crane up the road so its got to be trashed then. May be worth giving them a call as the old boy was a good spod to talk to.

They have half a donzen pinto engines around too.