Board logo

wanted! sierra thermostat housing rubber blanking hose
gregf27 - 9/7/07 at 08:09 AM

Just dropped my lad off at school, and sprung a leak!!,
the rubber blanking piece that fits on the overflow/bleed valve thing on the sierra thermostat housing has split , next to the jubilee clip,
has anyone got a spare they can send me please?? -
just for good measure the spot welds on one of my k+N filter plates has decided to part company !! nearly lost the filter and plate too - great start to a Monday!!!

cheers ,
Greg


Peteff - 9/7/07 at 08:11 AM

Stick a piece of pipe on it with a bolt in the end and two jubilee clips.


splitrivet - 9/7/07 at 08:38 AM

I used a piece of pipe and a plumbing 15 mill solder type stop end.
Cheers,
Bob


James - 9/7/07 at 01:39 PM

18mths ago it was about £1.80 for the proper part from Ford.
Was in stock at Farnborough.


HTH,
James


adithorp - 9/7/07 at 05:11 PM

u2u me your address and I'll stick one in the post.

Adrian


gregf27 - 9/7/07 at 07:33 PM

Adrian you have u2u!!

Many thanks for the replies guys once again!

Greg