Just thought I'd try in here to see if anyone has a carb trumpet, mine got ripped off in the accident that wrecked the bike.
Its for a '93 RR-P Fireblade, Im sure a '92 RR-N is the same and possibly some of the slightly later models too.





Hope the photo works, sorry about the poor piccy

here's your pic:
[img][/img]

If I were you, I would just smooth that trumpet back out - it is very easy to do!

Steve

Thats just one of the survivors, I've still got one missing.
I can probably run without any of them fitted, engine seems to run fine with just two at the mo.
What did I do wrong with the photo, I used
[$img]http://www.locostbuilders.co.uk/photos.php?action=showphoto&photo=carb%20trumpet2.JPG[/img]
without the $ in the 1st [$img]

I think it wants to be a bit more like:

[$img]http://www.locostbuilders.co.uk/upload/carb%20trumpet2.JPG[$/img]

you get the address by going into your archive -> get the photo up -> right click properties -> use the address shown

Well if thats the case Phil, and if no-one else is forthcoming off here, then you should probably give Andy of AB Performance a call on 01449 73 66 33 - he is bound to have a spare one somewhere, but if not you could try giving Malc of Yorkshire engines a call on 07960 011 585.

hope this helps!
Steve