Board logo

Sierra Prop
Adam - 9/9/07 at 08:42 PM

Hi All,

I'm building a MK indy and bought a 1991 sierra ghia to strip and use it's parts. Well i took the prop up to MK to get modified only to be told it's the wrong one. Has anyone got or know where i might get the right prop from.

Cheers
Adam

ReMan - 9/9/07 at 08:46 PM

2 wheel drive sierra

It needs to look like the ones pictures in the reply to your last post

Adam - 9/9/07 at 08:56 PM

the car i took it off was a two wheel drive. I'm trying to source a used prop from a SIERRA becuase the cost a new one is too much

roadrunner - 9/9/07 at 09:42 PM

You need one like this, £20 scrapyard.
propshaft before
propshaft before

James - 10/9/07 at 11:31 AM

quote:
Originally posted by ReMan
2 wheel drive sierra

It needs to look like the ones pictures in the reply to your last post


Adam - 10/9/07 at 12:14 PM

I know i posted befor ebut everyone have suggested new ones...best price i've got is 350quid! Point in this post was did anyone have one to sell or know of anwhere that has a sierra prop.

Adam

andyace - 10/9/07 at 12:49 PM

quote:
Originally posted by Adam
I know i posted befor ebut everyone have suggested new ones...best price i've got is 350quid! Point in this post was did anyone have one to sell or know of anwhere that has a sierra prop.

Adam


I got mine from gts (http://www.ekmpowershop5.com/ekmps/shops/gtstuning/index.asp) for about £125, its looks the biz and is powdercoated.

If you can't get hold of a prop I have one sitting in my garage, I live in Birmingham, however I work in Nottingham (3 miles off J26). It's yours for free if you want to collect it.

[Edited on 10/9/07 by andyace]

ReMan - 10/9/07 at 07:20 PM

quote:
Originally posted by Adam
I know i posted befor ebut everyone have suggested new ones...best price i've got is 350quid! Point in this post was did anyone have one to sell or know of anwhere that has a sierra prop.

Adam


How does your compare to the one in Roadrunners pic above?
That's what it should start out like.
MK can mod them for you so it looks like the one in the previos posts response . ie with a metal flange both ends rather than the big rubber donut above.
If budget is tight, then I would do that.
HTH

Adam - 10/9/07 at 07:50 PM

My prop is the longer one.... i took this pic at MK. The smaller one (Correct one) is a cutomers so i couldn't exchange. Apparently i couldn't use mine cause i was using a bike engine. Rescued attachment Prop 1sm.jpg
Rescued attachment Prop 1sm.jpg

ReMan - 10/9/07 at 09:35 PM

?
Anyone else here know why the above can't be modded?
?