Board logo

Megajolt map for Rover V8
Snuggs - 11/9/07 at 07:28 AM

Hi,

Does anyone have a Megajolt (TPS) map for this engine.

Rover V8 (P6) 3.5l, 500cfm Weber


Also does anyone know where to get a 36-1 trigger wheel pre drilled to fit a 6 bolt pulley.

I already know about www.trigger-wheels.com but they seem expensive (£43 inc p&p)


Clive


Agriv8 - 11/9/07 at 07:46 AM

Cant help you with the map.

But running a www.trigger-wheels.com trigger wheel and certainly dont think you will find a comercially available Laser Cut trigger any cheaper able to bolt strait onto the RV8.

PS the quality is very good remeber that if they are slightly out of true or have rounded edges on the teath it could start giving you all sorts of issues.

PS no connection with www.trigger-wheels.com just a happy punter !!

Regards

Agriv8


DarrenW - 11/9/07 at 03:49 PM

Ive gota few maps for Pinto's that i can send to you twice if it will help

i didnt know you were converting. Im very pleased with my conversion. i used TW.com but wheel for Pinto was only £25 or so (single bolt).


Snuggs - 14/10/07 at 05:57 PM

bttt


Cheers for the replies guys.

But I am still looking for a map.