I'm after the plug and socket that goes to the injectors, basically the same mating pair that a Powercommander fits into (i.e you unplug those connectors then plug the two connectors from the PC3 M-F, F-M to the bike loom).

Just though someone might have a partial loom or for some reason might have cut these off?

The bods at Dataspares do a big range of connectors from Japanese bikes, just in case you can't find them here.
Dataspares

That is a really useful site as these sorts of things are usually very hard to find. I'll have a look at lunch time to see if the ones I need are there.

Should be cheaper than getting them from a loom unless someone already has one chopped into bits (unlikely).