Board logo

Stainless Bends and Pipe
Chippy - 29/9/07 at 10:42 PM

Hi, looking for a reasonably priced supplier of the above. Bends in 2", and 2.5", and 2.5" pipe. Anybody know somewhere? Cheers Ray

zilspeed - 29/9/07 at 10:43 PM

There's a vendor on ebay does them - with expanded ends if required too.

nitram38 - 29/9/07 at 10:53 PM

Martin Keenan at MK engineering does them at reasonable prices.

[Edited on 29/9/2007 by nitram38]

Chippy - 29/9/07 at 10:58 PM

ZILSPEED, you don't happen to know who, as did a trawl on ebay with no luck.

NITRAM38, yes foregot him, will contact next week see what his prices are like.

Cheers guy's, Ray

UncleFista - 29/9/07 at 11:01 PM

Not used 'em but I have sdwlightfabrications in my favourites for future reference.

owelly - 29/9/07 at 11:02 PM

I use Gibbon Bothers in Whitby. Very cheap for cash. If you want more info I'llget you their details. You can ring them with your shopping list and I can go and collect and then post to you.

Simon - 29/9/07 at 11:05 PM

Also Millner Offroad.

ATB

Simon

daviep - 29/9/07 at 11:10 PM

Try HERE HERE (good prices) or HERE or even HERE , HERE or HERE

That's all I can think of for now!

the_fbi - 29/9/07 at 11:19 PM

quote:
Originally posted by zilspeed
There's a vendor on ebay does them - with expanded ends if required too.


http://stores.ebay.co.uk/Pipe-Werx-Performance-Exhausts

I used him for a link pipe from my manifold to the silencer.

It was about 14", with an offset 6 degree bend, two expanded ends both of different sizes.

All done via email and the result was spot on, couldn't have asked for a better result and it was £15 from memory too, which I think is good for a custom pipe.

Very happy.

dave r - 30/9/07 at 07:15 AM

allstainless are good as well

Chippy - 30/9/07 at 10:06 PM

Thanks to you all, my phone is going to be red hot next week, Cheers Ray