Board logo

WTD: Sierra Driveshaft Washers
TimC - 8/10/07 at 08:51 PM

Evenin' all

I've lost the large washers used when bolting the driveshaft flange to the hub. Does anyone have any spare for a few beer tokens.

Thanks

Macbeast - 8/10/07 at 09:24 PM

You mean the washers that go under the hub nuts ?

I'll have a look.

TimC - 9/10/07 at 08:06 AM

Hi Macbeast

Yes - that's the ones!

Macbeast - 9/10/07 at 10:01 AM

OK, I have new bearing sets for front hubs. I know they include hubnuts but not sure about the washers. If there are new washers the old ones are yours, but it'll be tomorrow before I can get them.

Will let you know asp.

SyKaTurbo - 9/10/07 at 10:47 AM

Front washers are different to the rear ones for push in shafts on mine.

mcerd1 - 9/10/07 at 11:18 AM

front or rear ?

if rear, push-in or bolt-on ? (don't know if they are different)
I should have some spare rear ones from a granada with bolt-on shafts

quote:
Originally posted by SyKaTurbo
Front washers are different to the rear ones for push in shafts on mine.


on my front ones they are splined onto the stub axle (the outside is toothed for the ABS sensor) but the rear ones (bolt on shafts) are just big washers

TimC - 9/10/07 at 12:54 PM

Rear for bolt-on type (lobro) shafts please.......

[Edited on 9/10/07 by TimC]

mcerd1 - 10/10/07 at 09:24 AM

I'll have a look later and get back to you....

Macbeast - 10/10/07 at 05:04 PM

Sorry M8, had a look and the bearing kits do not include new washers so I'll be needing my old ones myself.

Hope someone else can help.

mcerd1 - 14/10/07 at 10:13 AM

Still need a pair of washers ??

I've got 1 spare set (sorry pics a bit big)

mcerd1 - 17/10/07 at 12:38 PM

if anyone wants to know they mesure:

45mm outside diam.
5mm thick
~22.2mm hole