Board logo

duratec inlet wanted
bigrich - 5/3/08 at 09:41 AM

just been asked by my brother if anyone may have an inlet manifold for a 2002 2 litre mondeo
If your fitting T/Bs and junking the manifold then u2u me
usual cash incentives/beer vouchers etc


jacko - 5/3/08 at 10:29 AM

Tim windmill may have one he has just fitted a griffin manifold try a u2u to him

SORRY he has a zetec wrong engine
Jacko

[Edited on 5/3/08 by jacko]


coozer - 5/3/08 at 11:32 AM

2002 Mondeo not Zetec? Duratecs not that old IMO.


bigrich - 5/3/08 at 09:51 PM

deffo a duratec. so I'm told
plastic manifold with a oil seperator attached

[Edited on 5/3/08 by bigrich]


rusty nuts - 5/3/08 at 09:58 PM

Be careful if using s/h manifold, have had a couple of cases where the secondary butterflies break and get into the engine. Early signs are rattling from manifold


bigrich - 5/3/08 at 10:19 PM

Cheers for the info Rusty, i will pass this on,
aparently this cars manifold is cracked and it idles at 3000rpm so he wants a spare manifold incase it can't be repaired.