Has anyone got a short length (30cm) of .75" id thick walled tube? I need it for seatbelt mounts so it needs to be thickish walled. Beer tokens in exchange!!!

What about the 25mm cds used for wish bones thats 2.6mm wall so would give you 19.8mm id. Might have some if it will do

[Edited on 10/3/08 by jabs]

Yes, that would be perfect. It will be cut so actually I'm after 4 x 60mm lengths, if you have any left. Thanks

What I thought I had and what I have is not the same

what I have is

170mm of 25.5mm od with 2.2mm wall id=21.10mm this is cds

or

250mm of 27.3mm od with 2.8mm wall id=21.9mm this is erw

is this any good

U2U sent

Thanks for looking - the threaded inserts I will be using are 19mm/.75in od so I think your tubes will be too big. The reply/effort are appreciated though.