Board logo

50mm i.d. fuel safe pipe
eccsmk - 30/3/08 at 06:31 PM

as above but must be a 90 degree bend with 150mm lengths each side
for my little indy

[Edited on 30/3/08 by eccsmk]

LBMEFM - 30/3/08 at 06:53 PM

50mm is nearly 2". I am using central heating mico-bore with plastic braided tubiing for the conections and bends.
Barry

Jon Ison - 30/3/08 at 07:11 PM

quote:
Originally posted by LBMEFM
50mm is nearly 2". I am using central heating mico-bore with plastic braided tubiing for the conections and bends.
Barry


I think you will find he wants it for his filler neck/tank 2" bore fuel line.........

LBMEFM - 30/3/08 at 07:29 PM

Sorry, bit of a senior moment with my last posting. I got my filler hose from MK together with a locking fuel cap and restrictor.
Barry

[Edited on 30/3/08 by LBMEFM]

[Edited on 30/3/08 by LBMEFM]

eccsmk - 30/3/08 at 08:24 PM

sorry its for between the fuel cap and the tank


[Edited on 30/3/08 by eccsmk]

wicket - 30/3/08 at 08:54 PM

Think Automotive flexible fuel pipe, not cheap though.

http://www.thinkauto.com/

NS Dev - 31/3/08 at 09:22 PM

should have a metre in the workshop, ket me check tomorrow eve.

eccsmk - 1/4/08 at 08:31 AM

wonderful
im away on site until fri/sat so if i dont get back to you dont be offended
many thanks