Board logo

Wanted - nylon / PTFE bar
Paul TigerB6 - 12/4/08 at 04:38 PM

Hi all,

Would anyone happen to have a small piece of nylon or PTFE bar of around 16mm diameter at all?? I just need a short piece (2inch max) in order to make an adaptor for fitting a gearknob to a sierra gearstick.

Cheers
Paul

[Edited on 12/4/08 by Paul TigerB6]

viatron - 12/4/08 at 05:06 PM

if no one has an offcut....

Linkydink

001Ben - 12/4/08 at 07:18 PM

Paul...

When do you need it by?

Ben

Paul TigerB6 - 12/4/08 at 07:27 PM

quote:
Originally posted by 001Ben
Paul...

When do you need it by?

Ben


No great rush at the moment now as i just managed to bodge a quick fix by using a short piece of fuel hose. That will certainly do the job for the moment but would imagine it will break up in time. SVA maybe a month away so looking for a piece before then.

Might be able to get a piece locally via another Locoster - should find out over the weekend.

001Ben - 12/4/08 at 08:42 PM

I will be able to get you a piece on tuesday if you want, i imagine i dont live far from you so just send me a U2U.

Ben

001Ben - 12/4/08 at 08:42 PM

I will be able to get you a piece on tuesday if you want, i imagine i dont live far from you so just send me a U2U.

Ben