as in title. I may be able to find some in Canada, but if anybody wants to get rid of some for cheap I'm listening!!
Thanks,
Rich

I'm not very knowledgeable with Spring Dims to be honest, so take the next bit with a pinch of salt, BUT - I'm not sure that 2" is an accurate Spring ID dimension. I think it should be 1.9" or 2.25"

Cheers,
Steve

Jeez, Steve, you're worse than me for wasting time on the computer!

I was told that number by the mechanic (250 kms away) who is doing work for me. I don't have them in front of me, but they're ProComp or whatever (can't even remember - I haven't seen the car for months).

They might be ProTech?

And if a mechanic told you 2" then they are prob 1.9" but it might be worth getting a set of calipers round them just to make sure...

As for wasting time - it's a bit too late to be building as I have neighbours, so what else is a saddo like me going to do when he's given up drinking this year!!!

Steve

The closest that Rally Design stock are these:

8" LENGTH 325LBS

7" LENGTH 500LBS

HTH
Steve

Yes, ProTech rings a bell. The guy has built two so he knows what he's doing, and unlike the guy who sold me the frame, I trust him!

Thanks again Steve. We all find your information very helpful!

[Edited on 24/4/08 by RK]

[Edited on 24/4/08 by RK]