Board logo

Wanted XFlow clutch plate
zilspeed - 6/9/08 at 06:06 PM

As per title. XFlow friction plate.

It can even be an old one, as long as the centre boss with the splines on it is ok, that would be fine.

If you can help, please contact me with your price.

Thanks.

(It's for my BEC )

blakep82 - 6/9/08 at 06:58 PM

sorry, not got one, but i'm intruiged!
why would you want one for a BEC?!

zilspeed - 6/9/08 at 07:14 PM

quote:
Originally posted by blakep82
sorry, not got one, but i'm intruiged!
why would you want one for a BEC?!


I need the splined centre part.
(I'm not bodging a sprocket adapter), it's to do with having a reversing mechanism. A mechanical reverse that doesn't go like or sound like a milk float.
To do what I want to do involves a xflow clutch plate centre, some machining and some fabrication.

I know everyone mostly does without a proper reverse, but to be honest I refuse to accept that as a suitable state of affairs. Road cars have reverse gears, my car will have a reverse gear too.

clairetoo - 6/9/08 at 07:46 PM

Do you want one for a four or five speed box ? I've got left-over friction plate from when I used the original four speed box ?

zilspeed - 6/9/08 at 09:13 PM

quote:
Originally posted by clairetoo
Do you want one for a four or five speed box ? I've got left-over friction plate from when I used the original four speed box ?


Claire

It is the smaller spline job I need, which I can't actually remember right now. I'll get back to you asap.

Cheers

JF

clairetoo - 6/9/08 at 09:27 PM

Sorry to say I just had a dig in the cupboard where I thought it was - and I cant find it
I had a bit of a clear-out a while back so I might have binned it

skodaman - 6/9/08 at 09:51 PM

got one from an 1100 u can have. Afaik the splines are exactly same as 1300 although friction plate is smaller diameter.

zilspeed - 7/9/08 at 06:59 AM

quote:
Originally posted by skodaman
got one from an 1100 u can have. Afaik the splines are exactly same as 1300 although friction plate is smaller diameter.


That would be great.
Please advise on total cost including delivery and I will pay by your choice of method asap.
(P.S. The condition when it arrives doesn't matter, so packing can be as basic as you like - a little bubble wrap and some tape.)

Claire - no problem, thanks very much for looking though.

cjtheman - 7/9/08 at 07:37 AM

i also have one if still needed
cheers
colin