as topic says... am after rear hubs for MK Indy and also after splines for rear as well (got the driveshafts already but guy had wrecked the splines when taking them off)

There are different push-in type driveshafts - not sure if you are after a pair of these or the outer splines from a pair of bolt on types??

Probably best to check what you have by counting the splines and posting it up on here. There was a thread somewhere about this - will have a look for you now

This might help you

[Edited on 15/9/08 by Paul TigerB6]

sorry, should have been more specific. It is the outer splines from bolt-on types.