Hi All

I need to get some plates cut for a non-car related project. It is only a small run; 10 if I can get away with it or up to 100 if needs be...

My local place, Lasermaster, seems to want to go out of business. I have now got requests for 3 separate quotes for jobs - one going back to November last year and I haven't heard a peep despite being told repeatedly that the jobs are on the board etc, I know for a fact that the machine is not doing much....

Anyway I need to get this short run done quickly as I have interest in the product so does anybody have a reliable source for lasercutting?

Thanks

andyw7de gets my recommendation every time at the moment. Fast and good price.

There is 3GE as well, who are excellent quality, though their lead times are slightly longer than Andy's

Not local to you, but local to me are....

Guttridge in Spalding (not used them for a while but are good)

http://www.guttridgeservices.co.uk/laser-cutting

Or Roscope in Kettering (who I send thousands of pounds worth of fab work to every month through work)

http://www.roscope.co.uk/

Isn't Boggle still doing it? I know he's from your neck of the woods, maybe worth a u2u to ask.

Cheers

Rich

Thanks for the swift replies - I didn't realise John at 3GE did lasercutting too - I'll give him a shout.

Boggle works for Lasermaster...

[Edited on 21/7/10 by Airhead]

I've used laser eng twice. Both times nice and cheap, sent them the DXF, said what material and got a nice load of cut parts back in the post.

depends what it is ?

micrometric in lincoln ......
or we have a CNC plasma

Midtherm in Dudley, used them very good cheapest in our area was £65 min. order.

if you answeard your phone or txt messages you may get more joy.

I can probably help, just happen to have one in my workshop!

However, DXF's a must really, our CAD guys are always busy! - So they tell me.