andylancaster3000
|
| posted on 30/11/08 at 07:29 PM |
|
|
WTD: 1800 Zetec Silver top
Hi all,
I'm after an 1800 silver top zetec and was wondering if anyone has got one lying about that is not being used? I've bought a fresh bottom
end; including new pumps, rings and bearings etc but need most of the rest of the engine bits, predomentaly a complete head! The important point is
that it needs to have either 928M or 958M stamped on the head (above the exhaust manifold).
I'm also interested in components such as a twin DCOE inlet manifold, RWD suitable sumps and adjustable pullies etc.
Anything considered and preferbly located nr Fleet-Hants, Loughborough or somewhere between the two!
Cheers,
Andy
|
|
|
|
|
coozer
|
| posted on 30/11/08 at 07:50 PM |
|
|
I have one here that is 1994 so no cat Just taken it out of my car to replace with a ST170.
Check my blog, its in excellent condition and with my ZX9R carbs gave 155bhp on the RR.
Fitted with 130 cams and a water rail, coil pack etc.
Looking for £200 as thats what I paid for it but will include a cambelt kit thats not been fitted.
Steve
1972 V8 Jago
1980 Z750
|
|
|
Danozeman
|
| posted on 30/11/08 at 10:21 PM |
|
|
I may have a zetec twin 40 manifold and twin 40's for sale soon.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
DavidW
|
| posted on 3/12/08 at 10:19 PM |
|
|
quote:
Originally posted by Danozeman
I may have a zetec twin 40 manifold and twin 40's for sale soon.
Pre August 1995 by any chance?
|
|
|
Peteff
|
| posted on 5/12/08 at 04:18 PM |
|
|
I have one here near Chesterfield everything still on it. It's from a Fiesta XR2i you can have it for £40. It's got 928m on the head. 35
miles to here from Lugabaruga.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
