Antnicuk
|
| posted on 1/2/09 at 09:02 PM |
|
|
Hubs or axle for my trailer
The axle on my trailer bent at the weekend and i need some hubs or a beam with hubs to replace it.
I was thinking of the rear hubs from a front wheel drive van as they will be nice and strong.
I would like the hubs, drums, wheels and if possible the handbrake cables.
Can anybody help?
600 BHP per ton, Stylus Brought back from the dead! Turbo Rotary Powered!
|
|
|
|
|
liam.mccaffrey
|
| posted on 1/2/09 at 09:17 PM |
|
|
there was a store when I lived in the states where you could just go in and buy all the parts to just bolt yourself together a trailer of an
afternoon. Brilliant
I need some part for my trailer too so interested in replies
Build Blog
Build Photo Album
|
|
|
jacko
|
| posted on 1/2/09 at 09:20 PM |
|
|
Think Kipper on here had two axles for sale
|
|
|
Volvorsport
|
| posted on 1/2/09 at 09:24 PM |
|
|
trailer axles on ebay .
theyve got the required spring rate built in .
www.dbsmotorsport.co.uk
getting dirty under a bus
|
|
|
Antnicuk
|
| posted on 1/2/09 at 10:11 PM |
|
|
Mine already has the leaf springs in place so i could either just clamp the beam to them or put a new beam in and attach the new hubs to them.
600 BHP per ton, Stylus Brought back from the dead! Turbo Rotary Powered!
|
|
|
kipper
|
| posted on 1/2/09 at 10:36 PM |
|
|
Axles
I have three brand new Alco axles at the moment.
Two are identical and would make a four wheel trailer.
One is for a single axle trailer.
all are new, galvanised, have reverse lockout so you can reverse without the brakes working, rubber in torsion.
I also have one Alco hitch with the anti sway coupling.
Axles are 120 quid each.
Coupling 120 quid.
Thanks for the heads up Jacko.
Regards Kipper.
PS located near Selby East Yorks
Where did that go?
<<<<
|
|
|
