donn006
|
| posted on 18/2/09 at 06:53 PM |
|
|
locost roll cage
hi any one out there got a roll cage to fit a locost chassis (ron champion) or one i can convert to fit
|
|
|
|
|
madteg
|
| posted on 18/2/09 at 06:54 PM |
|
|
Made my own.
 
|
|
|
RichardK
|
| posted on 18/2/09 at 06:56 PM |
|
|
MNR do them in kit form that you cut the fish mouths and weld together yourself, you'll need to give them measurements though. Think it was a
bit over a hundred quid if I remember correctly, but check with them first or the website!
Cheers
Rich
Gallery updated 11/01/2011
|
|
|
Steve Hignett
|
| posted on 18/2/09 at 08:25 PM |
|
|
Where are you based?
|
|
|
donn006
|
| posted on 18/2/09 at 11:47 PM |
|
|
locost roll cage
hi im based in corby, northants
|
|
|
HOL
|
| posted on 19/2/09 at 12:52 PM |
|
|
quote:
Originally posted by madteg
Made my own.
That looks quite clever. No hitting your head when you get in or out and only one small hole and circular mark on the side.
If you going into production, let me know. (I know im already copying your turbo installation - but im a poor excuse for a stalker.)
I had wanted to use my existing hoop, brace it at the back and run a removeable brace down to the passenger footwell. the plan being that I could
continue to use the wet weather gear.
But when I sit in the car, my skid-lid sits level with the hoop.
|
|
|
