MautoK
|
| posted on 19/2/09 at 06:48 PM |
|
|
Wtd: Speedo cable for Pinto Automatic
I've passed every aspect of the SVA EXCEPT my speedo cable is b*gg*r*d. The needle flickers because the inner has been damaged by mosture ->
rust. Of course, when I tested it, it was fine; when the SVA man drove the car, it played up! 
So does anyone have a Sierra speedo cable for an Auto-box, please?
I've tried various motor factors and Ford dealers (none in stock & NLA) 
He's whittling on a piece of wood. I got a feeling that when he stops whittling, something's gonna happen. (OUATITW/Cheyenne)
|
|
|
|
|
serieslandy
|
| posted on 19/2/09 at 07:08 PM |
|
|
I realise you will need a new gauge but a last resort
how about this?
Or is the output different on the auto box (I have a manual) but
this is the same as mine
[Edited on 19/2/09 by serieslandy]
[Edited on 19/2/09 by serieslandy]
|
|
|
MautoK
|
| posted on 19/2/09 at 07:58 PM |
|
|
Thanks for your help, serieslandy.
Very different g/box end with the auto.
I've put a couple of pics in my archive under 'Speedometer Cable'
He's whittling on a piece of wood. I got a feeling that when he stops whittling, something's gonna happen. (OUATITW/Cheyenne)
|
|
|
MautoK
|
| posted on 26/2/09 at 11:57 PM |
|
|
Got one through Ebay
He's whittling on a piece of wood. I got a feeling that when he stops whittling, something's gonna happen. (OUATITW/Cheyenne)
|
|
|
