RichardK
|
| posted on 6/3/09 at 08:05 PM |
|
|
Black air filter foam
Had a great day at Boggs today, chatting with David Bogg a very decent chap who certainly knows his carbs. We have now got the carbs setup really
well accross the range but the conical air filters I have on at the moment are too restrictive and I need to change to a piper cross foam type jobbie.
Problem is space, I know I'll have to make my own back plate but wondered if the black foam can be sourced any where off the roll, looked on
the bay and there is some red stuff which would look crap although it does have black on the other side but not sure if it could be used that way
round or not.
Anybody seen anything?
Cheers
Rich
Found these, anybody used em
http://www.technicalfoamservices.co.uk/air_filter_foams.php
[Edited on 6/3/09 by RichardK]
Gallery updated 11/01/2011
|
|
|
|
|
tul214
|
| posted on 6/3/09 at 08:14 PM |
|
|
Red here too!
Foam
1.6 Raw Super6 sold
|
|
|
David Jenkins
|
| posted on 6/3/09 at 08:16 PM |
|
|
I bought some from Pipercross - their genuine triple-layer stuff.
[Edited on 6/3/09 by David Jenkins]
|
|
|
will121
|
| posted on 6/3/09 at 10:03 PM |
|
|
quote:
Originally posted by David Jenkins
I bought some from Pipercross - their genuine triple-layer stuff.
[Edited on 6/3/09 by David Jenkins]
so did i, got mine from GPR but cant see it on line. how big a bit are you after?
|
|
|
RichardK
|
| posted on 6/3/09 at 10:42 PM |
|
|
Probably the min I could get away with is about 13" X 8"
Cheers
Rich
Gallery updated 11/01/2011
|
|
|
