r1_pete
|
| posted on 31/5/10 at 05:49 PM |
|
|
Help with a bit of machining.
Can anyone help me out with a bit of lathe work, I need the centre of my trigger wheel boring out a little, its 150mm dia, and wont fit in my
ML7's chuck.
Alternatively any hints on 'chucking it' for boring.
|
|
|
|
|
stevebubs
|
| posted on 31/5/10 at 05:52 PM |
|
|
bolt it to the front pulley and put the pulley in the chuck?
|
|
|
Confused but excited.
|
| posted on 31/5/10 at 06:06 PM |
|
|
Won't it fit in the chuck if you put the jaws in the other way round?
Tell them about the bent treacle edges!
|
|
|
trikerneil
|
| posted on 31/5/10 at 06:12 PM |
|
|
Has it got any holes in it that you can use to bolt it to a faceplate?
Neil
ACE Cafe - Just say No.
|
|
|
r1_pete
|
| posted on 31/5/10 at 08:46 PM |
|
|
Tried the reverse jaws, not quite big enough.
Its a solid wheel, maybe I could drill it for a faceplate.
Will pull the pulley off and have a look, but I wanted to use the centre hole to register it centre on the crank bolt head.
|
|
|
liam.mccaffrey
|
| posted on 31/5/10 at 08:56 PM |
|
|
Have you got a face plate?
2 min job if you have?
Build Blog
Build Photo Album
|
|
|
flak monkey
|
| posted on 31/5/10 at 08:58 PM |
|
|
If you struggle pop it in the post and I'll do it for you for a beer 
Sera
http://www.motosera.com
|
|
|
madteg
|
| posted on 31/5/10 at 09:17 PM |
|
|
If you are stuck send it to me and i will sort it.
[Edited on 31/5/10 by madteg]
|
|
|
